Restore The Factory Default Settings - NETGEAR WAC120 Reference Manual

A login prompt displays.
3. Enter the user name and password.
The user name is admin and the default password is password.
The General screen displays.
4. Select Maintenance > Upgrade > Restore Defaults.
5. Click the Browse button.
You are prompted to select a file where you previously saved configuration settings.
6. Select the file.
7. Click the Restore button.
The file uploads and the access point reboots.

Restore the Factory Default Settings

You can restore the access point to the factory default settings using the Restore Defaults
menu selection, or by using the Reset button.
To restore the factory settings:

1. Launch a web browser on the computer that is connected to the access point.
2. Enter http://192.168.0.100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The user name is admin and the default password is password.
802.11ac Wireless Access Point Model WAC120
Manage the Access Point
52