NETGEAR WAC120 Reference Manual page 50

Note: The web browser must support HTTP uploads.
You cannot perform the software upgrade from a computer that is connected to the access
point wirelessly. You must use a computer that is connected with an Ethernet cable.
WARNING:
When uploading firmware to the access point, do not interrupt the
web browser by closing the window, clicking a link, or loading a
new page. If the browser is interrupted, the upload might fail,
corrupt the software, and render the access point inoperable.
To upgrade the firmware:

1. Download the new software file from the NETGEAR website, save it to your hard disk,
and unzip it.
Visit http://www.netgear.com.
2. Launch a web browser on the computer that is connected to the access point.
3. Enter http://192.168.0.100 in the address field of the browser.
A login prompt displays.
4. Enter the user name and password.
The user name is admin and the default password is password.
The General screen displays.
5. Select Maintenance > Upgrade > Firmware Upgrade.
6. Click the Browse button and browse to the location of the image (.rmgs) upgrade file.
7. Click the Apply button.
802.11ac Wireless Access Point Model WAC120
Manage the Access Point
50