NETGEAR WAC120 Reference Manual page 54

4. Select Configuration > System > Advanced > SysLog.
5. If your LAN includes a syslog server, select the Enable Syslog check box.
6. In the Syslog Server IP Address field, type the IP address of your syslog server.
The access point sends all the syslog files to the specified IP address if the syslog option
is enabled. The default is 0.0.0.0.
7. In the Port Number field, type the port number that your syslog server is configured to
use.
The default port number is 514.
8. Click the Apply button.
Your settings are saved.
802.11ac Wireless Access Point Model WAC120
Manage the Access Point
54