NETGEAR WAC120 Reference Manual page 42

• LAN address range. Each access point must be configured to operate in the same LAN
network address range as the LAN devices.
• DHCP. If you are using DHCP, all access points must be set to obtain an IP address
automatically. See
When the wireless bridge is completed, a computer on either LAN segment can connect to
the Internet and share files and printers with any other computers or servers connected to
LAN Segment 1 or LAN Segment 2.
To configure a point-to-point wireless bridge between two access points:

1. Launch a web browser on the computer that is connected to the first access point.
2. Enter http://192.168.0.100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The user name is admin and the default password is password.
The General screen displays.
4. Select Configuration > Wireless Bridge.
5. Select the band that you want to use for the bridge:
• To set up the bridge on the 2.4 GHz band, click the 802.11b/bg/ng tab.
• To set up the bridge on the 5 GHz band, click the 802.11a/ag/na tab.
6. Select the Enable Wireless Bridging check box.
7. Select the Wireless Point-to-Point Bridge radio button.
8. To enable wireless client association, select the Enable Wireless Client Association check
box.
802.11ac Wireless Access Point Model WAC120
Configure the Basic IP Settings
Network Settings
42
on page 15.