Advanced Wireless Settings - NETGEAR WAC120 Reference Manual

4. Select Configuration > System > Advanced > General.
5. Select the Spanning Tree Protocol Enable or Disable radio button.
6. To require all VLANs to be configured as tagged VLANs, clear the Untagged VLAN check
box.
7. To change the untagged VLAN value, enter the new value in the Untagged VLAN field.
8. To change the number of management VLANs, enter the new value in the Management
VLAN field.
9. Click the Apply button.
Your settings are saved.

Advanced Wireless Settings

The default wireless LAN parameters usually work well. However, you can use these settings
to fine-tune the overall performance of your access point for your environment.
To configure advanced wireless settings:

1. Launch a web browser on the computer that is connected to the access point.
2. Enter http://192.168.0.100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The user name is admin and the default password is password.
The General screen displays.
802.11ac Wireless Access Point Model WAC120
Network Settings
34