4.
Select Configuration > Wireless Bridge.
5.
Select the band that you want to use for the bridge:
•
To set up the bridge on the 2.4 GHz band, click the 802.11b/bg/ng tab.
•
To set up the bridge on the 5 GHz band, click the 802.11a/ag/na tab.
6.
Select the Enable Wireless Bridging check box.
7.
Select the Client radio button.
8.
Enable the MAC clone feature.
The Disable radio button is selected by default. If you enable the MAC clone feature,
enter the MAC clone address.
9.
Click the Apply button.
Your settings are saved.
802.11ac Wireless Access Point Model WAC120
Network Settings
47