Qos Settings - NETGEAR WAC120 Reference Manual

• PIN Number. Select the PIN Number radio button and enter the wireless client's
security PIN in the field that displays. Click the Next button.
Within two minutes, go to the wireless device and use its WPS software to join the
network without entering a password. For more information, see the manual that
came with your device.
The access point attempts to add the WPS-capable wireless device. The WiFi LED on
the access point blinks slowly, green for three seconds, then off for three seconds. The
WiFi LED on the access point blinks green when the computer or WiFi device connects to
your access point and the access point WPS screen displays a confirmation message.
Step 6
7. Repeat

QoS Settings

Wireless Multimedia (WMM) is a subset of the 802.11e standard. WMM allows wireless traffic
to receive a range of priorities, depending on the type of data. Time-dependent information,
such as video or audio, receives a higher priority than normal traffic. For WMM to function
correctly, wireless clients must support WMM. Wi-Fi Multimedia (WMM) is enabled by default
in the access point.
You must use a computer that is configured with a static IP address of 192.168.0.210 and a
subnet mask of 255.255.255.0. During initial setup, use a wired Ethernet connection from the
computer to the access point.
To change the QoS settings:

1. Launch a web browser on the computer that is connected to the access point.
2. Enter http://192.168.0.100 in the address field of the browser.
A login prompt displays.
3. Enter the user name and password.
The user name is admin and the default password is password.
802.11ac Wireless Access Point Model WAC120
for each wireless device that you want to connect to the access point.
Initial Setup
29