Front and Side View
The status LEDs and icons on the front and side panels are shown in the following figure.
LEDs
Figure 2. Front and side view
LEDs and Buttons
The LEDs on the wireless access point light to indicate wireless access point activity:
Table 1. LEDs
LED
Description
Power
•
•
•
Activity
•
•
802.11ac Wireless Access Point Model WAC120
Off. Power is off.
Green. Power in on.
Amber. A self-test is running. During startup the LED is amber, then blinking
green before turning steady green after 45 seconds. If the LED is amber or
continues blinking green after one minute, a system fault exists.
Off. No Ethernet traffic is detected.
Green or blinking green. Ethernet traffic is detected.
Hardware Setup
WiFi On/Off button
WPS button
7