11
SERVICE WORK ON THE CHASSIS
11.18
Removing the shock absorber
11.19
Installing the shock absorber
11.20
Removing the seat
11.21
Mounting the seat
x
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Remove screw
without blocking the rear wheel. Fix the rear wheel in this position.
–
Remove screw
absorber.
L00064-10
x
Main work
–
Push splash protector
tighten screw
Guideline
Screw, top shock absorber
–
Mount and tighten screw
Guideline
L00064-11
Screw, bottom shock
absorber
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Remove screw
above.
L00052-10
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the
rear and simultaneously it push forward.
–
Make sure that the seat is correctly locked in.
L00053-10
and lower the rear wheel with the swing arm as far as possible
1
, push splash protector
2
3
to the side and position the shock absorber. Mount and
1
.
2
M12
.
3
M12
. Lift up the seat at the rear, pull it back and then remove it from
1
p. 32)
to the side, and remove the shock
60 Nm
Loctite
®
(44.3 lbf ft)
Loctite
60 Nm
®
(44.3 lbf ft)
p. 32)
40
243™
243™