11
SERVICE WORK ON THE CHASSIS
11.27
Sealing the air filter box
11.28
Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
11.29
Installing the main silencer
11.30
Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Info
Over a period, the fibers of the glass fiber yarn vanish into the air, and the silencer "burns out".
Not only is the noise level higher, the performance characteristic changes.
x
–
Seal the air filter box in marked area
401527-10
–
Remove screw
–
Pull the main silencer off of the manifold at rubber sleeve
L00057-10
–
Mount the main silencer with rubber sleeve
–
Mount and tighten screw
Guideline
Remaining screws, chassis
L00057-11
Preparatory work
–
Remove the main silencer. (
.
A
.
1
.
2
x
p. 43)
.
2
.
1
M6
10 Nm (7.4 lbf ft)
43