Installing The Lower Triple Clamp - KTM 85 SX 19 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.10

Installing the lower triple clamp

x
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Slide on O-ring
–
Correctly position upper steering head seal
C00250-10
–
Position the upper triple clamp with the steering.
–
Mount nut
C00252-10
–
Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
L00042-11
–
Tighten screws
Guideline
Screw, bottom triple clamp
L00082-10
p. 87)
.
2
, but do not tighten it yet.
3
to the front.
4
.
5
.
1
M8 15 Nm
(11.1 lbf ft)
36