Checking The Play Of The Steering Head Bearing; Adjusting The Play Of The Steering Head Bearing - KTM 85 SX 19 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.11

Checking the play of the steering head bearing

Warning
Danger of accidents Unstable vehicle handling from incorrect steering head bearing play.
–
Adjust the steering head bearing play without delay. (Your authorized KTM workshop will be glad to help.)
Info
If the bike is ridden with play in the steering head bearing, the bearing and the bearing seats in the frame can become dam-
aged over time.
11.12

Adjusting the play of the steering head bearing

Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Move the handlebar to the straight-ahead position. Move the fork legs to and fro in
the direction of travel.
No play should be noticeable in the steering head bearing.
» If there is noticeable play present:
–
Adjust the play of the steering head bearing.
–
Move the handlebar to and fro over the entire steering range.
The handlebar must be able to move easily over the entire steering range. No
400738-11
resting locations should be noticeable.
» If click positions are noticeable:
–
Adjust the play of the steering head bearing.
–
Check the steering head bearing and replace if required.
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Remove fuel tank breather
–
Release screws
–
Loosen screw
–
Loosen and retighten nut
Guideline
Nut, steering stem
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
L00033-11
–
Tighten screw
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, top triple clamp
–
Position the fuel tank breather
Finishing work
–
Check the play of the steering head bearing. (
–
Remove the motorcycle from the lift stand. (
x
.
1
.
2
.
3
.
4
.
3
.
2
.
1
p. 32)
( p. 38)
x
( p. 38)
x
p. 32)
p. 32)
M20x1.5 10 Nm (7.4 lbf ft)
M8 20 Nm
(14.8 lbf ft)
M8 20 Nm
(14.8 lbf ft)
p. 38)
p. 32)
38