Installing Front Fender; Removing The Shock Absorber - KTM F8475S0 2019 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.17
11.18
60

Installing front fender

F01526-10

Removing the shock absorber

F01527-10
S01220-10
Main work
–
Position front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
Finishing work
–
Install the start number plate. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Remove the cable ties.
–
1
Remove screws with the washers.
–
2
Remove screw .
–
Take off the left frame protector.
–
Push the right frame protector to the front and take off at the
bottom.
–
3
Remove screw .
–
4
Remove fitting .
Info
Raise the wheel slightly to be able to remove the screws
more easily.
1
and
M6 10 Nm (7.4 lbf ft)
p. 59)
p. 50)
2
.