Service Work On The Chassis; Raising The Motorcycle With The Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM 85 SX 19 Owner's Manual

11

SERVICE WORK ON THE CHASSIS

11.1

Raising the motorcycle with the lift stand

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
11.2

Removing the motorcycle from the lift stand

Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
11.3

Bleeding the fork legs

–
Raise the motorcycle at the frame underneath the engine.
Lift stand (59229055000)
The wheels must no longer touch the ground.
–
Secure the motorcycle against falling over.
L00036-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
dle.
Info
Remove the plug-in stand before riding.
L00022-10
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Remove bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Mount and tighten bleeder screws.
L00038-10
Finishing work
–
Remove the motorcycle from the lift stand. (
into the left side of the wheel spin-
1
p. 32)
briefly.
1
p. 32)
32