Removing The Lower Triple Clamp - KTM 85 SX 19 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.9

Removing the lower triple clamp

(85 SX 17/14)
–
Position brake caliper, and mount and tighten screws
Guideline
Screw of brake caliper
–
Position the brake line. Mount the clamp and screws
(85 SX 19/16)
–
Position the brake caliper with spacers and fit and tighten screws
L00047-11 Guideline
Screw of brake caliper
–
Position the brake line. Mount the clamp and screws
Finishing work
–
Install the front wheel.
–
Remove the motorcycle from the lift stand. (
x
Preparatory work
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove the front fender. (
Main work
–
Remove fuel tank breather
–
Remove nut
bar and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
C00251-10
–
Remove protective ring
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
L00045-10
M8
M8
( p. 61)
x
x ( p. 61)
( p. 34)
x
p. 39)
p. 39)
.
1
. Remove screw , take off the upper triple clamp with the handle-
2 3
.
4
.
4
25 Nm Loctite ®
(18.4 lbf ft)
.
5
4
25 Nm Loctite ®
(18.4 lbf ft)
.
5
p. 32)
p. 32)
35
243™
.
243™