Cabling Rj-48C Connectors - Juniper ERX-1410 Installation And User Manual

4-12 CHAPTER 4
Cabling the ERX System

Cabling RJ-48C Connectors

Figure 4-6 I/O module with RJ-45 connector
To cable I/O modules with RJ-48C connectors:
1
Insert the RJ-48C connector into the selected port.
2
Terminate the other end in the appropriate network interface, such
as a multiplexer (MUX) device.
3
Repeat steps 1 and 2 for all ports.
.
Figure 4-7 I/O module with RJ-48C connectors