2-4
CHAPTER 2
Installing the ERX System
Unpacking the ERX-700 Series
Figure 2-3 Removing an L-bracket
8
Depending on where you want to position the system, proceed to
Freestanding Installation
chapter.
The ERX-700 series come boxed but not attached to a skid.
For your convenience, we recommend that you unpack the ERX system
in the location where you want to install it.
To unpack the ERX-700 series:
1
Open the carton from the top.
2
Remove the box of accessories that sits on top of the system.
3
Before you remove the unit from its carton, proceed to
Installation
or
Rack-Mounted
or
Rack-Mounted
Installation, later in this
Installation, later in this chapter.
Freestanding