Installing Erx Modules; Overview - Juniper ERX-1410 Installation And User Manual

Installing ERX Modules

Overview

This chapter describes how to physically install and remove ERX
modules. If the modules you want are already installed in the system, you
can skip this chapter and go to
For information about managing installed modules, see
Basics Configuration Guide, Chapter 5, Managing Line Modules and
SRP Modules.
Topic
Overview
Protecting Modules and Slots
Safety Guidelines
Installing SRP I/O and SRP Modules
Installing Line Modules and Their I/O Modules
Removing a Module
Installing Components for Line Module Redundancy
The Next Step
In the ERX-1400 series, modules mount vertically in a chassis with 14
slots, whereas in the ERX-700 series, modules mount horizontally in a
chassis with 7 slots. See
between lines modules and SRP modules, see
Module Specifications.
Chapter 4, Cabling the ERX
Figure 3-1. For information about compatibility
3
System.
ERX System
Page
3-1
3-4
3-6
3-6
3-10
3-13
3-14
3-17
Table B-1 in Appendix B,