5-6
CHAPTER 5
Accessing the ERX System
SNMP
The Next Step
Caution: Do not change the IP address for the Ethernet interface that you are
using to communicate with the system. If you change the address, you will lose the
Telnet session.
The system supports Simple Network Management Protocol (SNMP), a
standard management protocol for IP networks. You can configure the
system as an SNMP agent.
As an SNMP agent, the system provides access to management
information that it maintains. See the
Guide, Chapter 3, Configuring SNMP
the
ERX Command Reference Guide
available for configuring the system as an SNMP agent.
Go to
Chapter 6, Powering Up the
ERX System Basics Configuration
for information on SNMP. See
for the commands that are
System.