Time Events Set Up Group; Table 3-26 Time Evt Group Function Prompts - Honeywell UDC3500 Product Manual

3.26 Time Events Set Up Group

Introduction
This group appears only when the Real Time Clock option is installed. These selections
allow the user to program the instrument to perform specific functions at the same time of
day five or seven days a week or on one specific date and time. Up to two independent
functions can be configured.
Function Prompts

Table 3-26 TIME EVT Group Function Prompts

Function Prompt
Lower Display
EVENT 1
TIME 1
HOUR 1
MINUTE1
MONTH 1
DAY 1
10/05
Selections or
Range of Setting
Upper Display
NONE
ALM1SP2
ALM2SP2
ALM3SP2
ALM4SP2
STrSP/R
TIMER
AUTO
MAN FS
USE SP1
USE SP2
5DAY WK
7DAY WK
DAYofWK
CALENDR
0 to 23
0 to 59
JANUARY – DECEMBR
1 to 31
1 to 7
UDC3500 Universal Digital Controller Product Manual
Parameter
Definition
EVENT 1—The function performed by this event.
NONE
ALARM 1 SETPOINT 2 (NOTE 1)
ALARM 2 SETPOINT 2 (NOTE 1)
ALARM 3 SETPOINT 2 (NOTE 1)
ALARM 4 SETPOINT 2 (NOTE 1)
START SETPOINT PROGRAM OR RAMP
TIMER
AUTOMATIC MODE (NOTE 2)
MANUAL MODE AT FAILSAFE OUTPUT (NOTE 2)
CONTROL TO LOCAL SETPOINT 1 (NOTE 2)
CONTROL TO LOCAL SETPOINT 2 (NOTE 2)
TIME 1—Time of first event.
FIVE-DAY WEEK—The configured event will occur
at the same time Monday through Friday.
SEVEN-DAY WEEK—The configured event will
occur at the same time Sunday through Saturday.
SAME DAY EVERY WEEK—The configured event
will occur once a week at the configured time.
CALENDAR—The configured event will occur once
at a specific date and time.
HOUR—24 Hour setting
MINUTE—60 Minute setting
MONTH—Month of the Year (NOTE 3)
DAY—Day of Month or Week
When "CALENDR" is configured: Day of the month
(NOTE 5)
When "DAYofWK" is configured: Day of the week
(Sunday = 1, Saturday = 7)
(NOTE 4)
Configuration
169