Configuration
3.25 Read Maintenance Set Up Group
Introduction
The Read Maintenance group prompts are part of the Healthwatch feature. These prompts
let you view the values of the Healthwatch Timers and Counters. All of the values in this
Set Up Group are "Read Only" and cannot be changed.
Function Prompts
Table 3-25 READ MAINTENANCE Group Function Prompts
Function Prompt
Lower Display
DAYS 1
HRS.MIN1
DAYS 2
HRS.MIN2
DAYS 3
HRS.MIN3
COUNTS 1
COUNTS 2
COUNTS 3
168
Selections or
Range of Setting
Upper Display
0 to 9999
00.00 to 23.59
0 to 9999
00.00 to 23.59
0 to 9999
00.00 to 23.59
0-9999 (1 = 1000 counts
for output relays 1 to 5)
Same as COUNTS 1
Same as COUNTS 1
UDC3500 Universal Digital Controller Product Manual
Parameter
Definition
Shows elapsed time of Timer 1 in Days.
Shows elapsed time of Timer 1 in Hours and
Minutes.
Shows elapsed time of Timer 2 in Days.
Shows elapsed time of Timer 2 in Hours and
Minutes.
Shows elapsed time of Timer 3 in Days.
Shows elapsed time of Timer 3 in Hours and
Minutes.
Shows the value of Counter 1.
Shows the value of Counter 2.
Shows the value of Counter 3.
10/05