Table of Contents
Advertisement
IBM Infoprint 1130/1140
Dead Machine Service Check
Note: If a high-capacity input tray is installed, remove the option
and check the base printer for correct operation. If the base printer
operates correctly, go to
Service Check" on page
operate correctly, remove any other attached paper handling
options. Observe all necessary ESD precautions when removing
and handling the system board or any of the installed option cards or
assemblies.
Service Tip: When removing the LVPS from the printer observe the
following:
1. The LVPS uses a self docking connector that mates with
another connector mounted on the left side frame assembly.
Some force may be required to pull the LVPS loose from the
connector.
2. Gently remove the LVPS supply using caution not to damage
the printed circuit board. Pull the LVPS out far enough to reach
the fuser lamp cable.
3. The fuser lamp cable uses a locking type of connector system.
Unlock the fuser lamp cable connector, disconnect the cable
and remove the LVPS from the printer.
Note: If the LVPS is blowing fuses, remove the LVPS from the
printer. Check the metal LVPS shield for signs of damage that
causes the shield to touch components on the LVPS board
assembly.
FRU
1
Line Voltage
2
AC Line Cord
2-50
Service Manual
"High-Capacity Feeder Input Tray
2-72. If the base printer continues to not
Action
Check the AC line voltage. If the line
voltage is incorrect, inform the
customer.
Check the line cord for any signs of
damage. If correct, check the
continuity of the line cord and
replace if necessary.
Advertisement
Table of Contents
