Table of Contents
Advertisement
IBM Infoprint 1130/1140
User Message
Primary
62 Disk Full
63 Unformatted
Disk
80 Scheduled
Maintenance
81 Engine Code
CRC Failure
88 Toner Low
2-36
Service Manual
User
Message
Explanation
Secondary
This error code is displayed when there
is not enough free space on the disk to
hold the resources that have been
requested to be written to the disk. This
message displays for both resource and
PostScript Disk operators when the disk
is full.
This error code displays when the
printer detects an unformatted disk at
power on. Press Go to clear the
message. The disk is marked as bad
and normal operation continues. Disk
operations are not allowed until the disk
is formatted.
The operator panel displays this
message at each 300K page count
interval. It is necessary to replace the
fuser assembly, transfer roller, and
charge roll at this interval to maintain the
print quality and reliability of the printer.
The parts are available as a
maintenance kit. For more information,
go to the
on page
This error displays when the microcode
to be programmed in the engine flash
code module has failed a CRC check.
Press Go to clear the message. The
microcode data is discarded and must
be re-transmitted from the host
computer.
This message displays when toner low
occurs and the toner low alarm is
activated. Press Go to clear this
message.
"Scheduled Maintenance"
6-2.
Advertisement
Table of Contents
