Table of Contents
Advertisement
IBM Infoprint 1130/1140
Print Quality - Toner on backside of printed page
Service Tip: This is generally caused by loose toner in the machine
in the paper path being carried through the printer on the backside of
the paper.
FRU
1
Hot Roll Fuser Assembly
2
Transfer Roll Transfer Plate
Assembly
2-120
Service Manual
Action
Toner is being carried out on the
backside of the media. This problem
is generally caused by a toner
buildup on the fuser hotroll or
backup roll. Check the fuser hotroll
and backup roll for any noticeable
buildup of toner. Repair as
necessary.
Check the transfer roll for any signs
of toner buildup or loose toner
around the area of the transfer plate
assembly. Clean the area and run
another copy. If the problem
continues, replace the FRUs in the
following order:
HVPS
system board
Advertisement
Table of Contents
