IBM Infoprint 1130 Service Manual page 168

IBM Infoprint 1130/1140
Tests
Input Tray Tests
If selected, the following menu selections are
available:
1.Feed Tests
If selected, the following menu selections
are available:
a. Tray x (x-Tray 1,2,3,4, or 5 where
installed)
b. MP Feeder
c. Envelope Feeder (if installed)
2.Sensor Test
If selected, the following menu selections
are available:
a. Tray x (x=Tray 1,2,3,4, or 5 where
installed)
b. MP Feeder
c. Envelope Feeder (if installed)
Output Bin Tests
If selected, the following menu selections are
available:
1.Feed Tests
If selected, the following menu selections
are available:
a. Standard Bin
b. Output Bin x (x=Output Bin
1,2,3,4,5,6,7,8,9, or 10 when installed)
2.Feed to all bins test
3.Sensor Tests
If selected, the following menu selections
are available:
a. Standard Bin
b. Output Bin x (x=Output Bin
1,2,3,4,5,6,7,8,9, or 10 when installed)
Finisher Tests
If selected, the following menu selections are
available:
1.Feed Tests
2.Sensor Tests
Refer to Test Page
"Input Tray Tests" on
page 3-19
"Output Bin - Feed to
all Bins Test" on
page 3-20
"Output Bin Feed
Test" on page 3-21
"Output Bin Sensor
Test" on page 3-21
"Finisher Tests,
StapleSmart Finisher
Option" on page 3-24
Diagnostic Aids
3-3