Table of Contents
Advertisement
IBM Infoprint 1130/1140
User Message
Primary
54 Standard Serial
Error
54 Serial Option X
Error
56 Standard Serial
Disabled
56 Parallel Port
Disabled
58 Too Many
Trays Attached
58 Too Many Bins
Attached
58 Too Many
Disks Installed
61 Defective Disk
User
Message
Explanation
Secondary
This error is displayed when a serial
error (framing or parity) is detected on
the standard serial port. This usually
indicates the serial port is not set up
correctly.
This error is displayed when a serial
error (framing or parity) is detected on
the optional serial port. This usually
indicates the optional serial port is not
set up correctly.
This error is displayed when data is sent
to the printer across the standard serial
port, but the port has been disabled.
This error is displayed when data is sent
to the printer across the parallel port, but
the parallel port has been disabled.
Once this message is displayed,
reporting of further errors is suppressed
until the menus are entered, or the
printer is reset.
This error code is displayed when too
many input trays are attached to the
printer.
This error code is displayed when too
many optional output bins are attached
to the printer.
This error is displayed when too many
disks are attached to the printer.
This error code is displayed when the
printer detects a defective disk. This
error may occur at power on or during
disk format and write operations.While
this message is displayed: press Go to
clear the message. The disk is marked
defective and normal printer operations
continue. Disk operations are not
allowed with a defective disk. The
Format Disk menu is not shown.
Diagnostic Information
2-35
Advertisement
Table of Contents
