Table of Contents
Advertisement
IBM Infoprint 1130/1140
Error Code
914 DC Pick
Motor: No
encoder
feedback
917 Transfer Roll
920 Fuser Error
921 Fuser Error
922 Fuser Error
923 Fuser Error
924 Fuser Error
925 Fuser Error
927 Fan Stalled
Action
Check the integrated paper tray (tray 1) for correct paper
loading. Reload the paper and POR the printer. If the
error continues, go to the
Service Check" on page
Indicates a problem in the transfer roll area. Go to the
"Transfer Roll Service Check" on page
Indicates that the fuser is below temperature when
printing. Go to the
page
2-65. Use of the
Codes" on page 2-17
Indicates that the fuser is below standby temperature
when the printer is idle. Go to the
Check" on page
(Fuser) Sub Error Codes" on page 2-17
diagnose fuser failure.
Fuser failed to reach standby temperature. Go to the
"Cold Fuser Service Check" on page
"Base Printer (Fuser) Sub Error Codes" on
page 2-17
may help diagnose fuser failure.
Fuser is too hot during printing or when printer is idle. Go
to the
"Hot Fuser Service Check" on page
of the
"Base Printer (Fuser) Sub Error Codes" on
page 2-17
may help diagnose fuser failure.
An open circuit has been detected in the Fuser
Thermistor Circuit. Go to the
Check" on page
(Fuser) Sub Error Codes" on page 2-17
diagnose fuser failure.
1. Indicates the wrong fuser lamp is installed. Check the
fuser lamp for the correct type of lamp that should be
installed.
2. Check the line voltage to ensure it is not above the
maximum rating for the printer.
3. This error may also indicate the fuser reached
standby temperature too quickly.
4. The hot roll may not be correct for this fuser. Ensure
that the correct hot roll is installed.
Indicates a printer fan stalled. Go to the
Check" on page
"Input Tray(s) Option
2-69.
"Cold Fuser Service Check" on
"Base Printer (Fuser) Sub Error
may help diagnose fuser failure.
"Cold Fuser Service
2-65. Use of the
"Base Printer
"Hot Fuser Service
2-67. Use of the
"Base Printer
2-63.
Diagnostic Information
2-123.
may help
2-65. Use of the
2-67. Use
may help
"Fan Service
2-3
Advertisement
Table of Contents
