Original Setting - Olivetti d-Color MF451 Instructions Manual

5.2

Original Setting

5.2 Original Setting
Configure the original status or original direction for outputting desired copies.
%
Press [Original Setting].
Settings
Mixed Original
Z-Folded Original
Original Size
Binding Position
Original Direction
Despeckle
d-Color MF651/551/451
Loads originals of different sizes into the ADF and scan them at a time.
Correctly detects the original size when folded originals are loaded into the
ADF and copied.
Select [Auto] to detect the size of the original automatically.
If the size of the original is not automatically detected, select the original
size.
Custom Size Enter the original size.
Photo Size Select the photo size.
Specify the original binding position (page margin) to prevent the copy
from being printed upside-down when scanning a 2-sided original,
Auto Automatically configures the binding position of
the original.
•
•
Specify the original direction to load into the ADF or place on the original
glass when copying 2-sided originals or making 2-sided or combined cop-
ies.
Reduces the influence of a dirt of the slit glass upon a copy output when
loading an original in the ADF.
A binding margin along the long side of the
paper is selected if the original length is
297mm or less.
If the original length is more than 297mm, a
binding margin along the short side of the pa-
per is selected.
5
5-17