Field Service Ver. 2.0 Jan. 2008 1. Product specification Outline Product specification A. Type Name Mailbin kit Installation Install at the top section of the finisher elevator tray. Number of bins 4 bins Number of sheets stored per bin 125 sheets (Total 500 sheets) (90 g/m , 24 lb) Plain paper Storable paper...
Page 6
1. Product specification Field Service Ver. 2.0 Jan. 2008 Blank Page Service Manual Y108462-9...
Field Service Ver. 2.0 Jan. 2008 2. Other Maintenance Other Disassembly/adjustment prohibited items A. Paint-locked screws NOTE • To prevent loose screws, a screw lock in blue or green series color is applied to the screws. • The screw lock is applied to the screws that may get loose due to the vibrations and loads created by the use of machine or due to the vibrations created during transportation.
2. Other Field Service Ver. 2.0 Jan. 2008 Disassembly/Assembly/Cleaning list (Other parts) 2.2.1 Disassembly/Assembly parts list Section Part name Ref. page Rear cover Front cover Exterior parts Upper cover Right door Paper output tray 2.2.2 Cleaning parts list Section Part name Ref.
Field Service Ver. 2.0 Jan. 2008 2. Other 2.3.2 Front cover/Upper cover/Paper output tray 4510F2C507DA 1. Remove the screw [1] and remove the front cover [2]. 2. Remove the rear cover. See P.4 3. Remove the upper cover [3]. 4. Remove the paper output trays [4]. Cleaning procedure NOTE •...
Page 10
2. Other Field Service Ver. 2.0 Jan. 2008 Blank Page Service Manual Y108462-9...
Field Service Ver. 2.0 Jan. 2008 3. How to use the adjustment section Adjustment/Setting How to use the adjustment section • “Adjustment/Setting” contains detailed information on the adjustment items and proce- dures for this machine. • Throughout this “Adjustment/Setting,” the default settings are indicated by “ ”. Advance checks Before attempting to solve the customer problem, the following advance checks must be made.
4. Sensor check Field Service Ver. 2.0 Jan. 2008 Sensor check Check procedure A. Procedure 1. Call the Service Mode to the screen. See P.338 of the main body service manual. 2. Touch [State Confirmation]. 3. Touch [Sensor Check]. 4. Touch three times [ ]. 4.1.1 Sensor check screen •...
Field Service Ver. 2.0 Jan. 2008 4. Sensor check 4.1.2 Sensor check list Operation characteristics/ panel display Symbol Panel display Part/signal name Paper Paper not PS10 Paper Passage 1 Lower transport sensor present present Paper Paper not Paper Passage 2 Upper transport sensor present present...
5. Finisher operations Field Service Ver. 2.0 Jan. 2008 Finisher operations Entering Finisher Check 1. Call the Service Mode to the screen. See P.338 of the main body service manual. 2. Touch [Finisher]. 3. Touch [CB-FN adjustment]. 4. Touch [Finisher Check]. 5.
Field Service Ver. 2.0 Jan. 2008 6. Jam display Troubleshooting for d-Color MF350 / d-Color MF250 / d-Color MF201Plus Jam display Misfeed display • When misfeed occurs, message, misfeed location “Blinking” and paper location “Light- ing” are displayed on the touch panel of the main body. 4510F4C507DA Display Code...
6. Jam display Field Service Ver. 2.0 Jan. 2008 Sensor layout 4510F4C501DA [1] Upper transport sensor [2] Lower transport sensor PS10 [3] Transport sensor Service Manual Y108462-9...
Field Service Ver. 2.0 Jan. 2008 6. Jam display Solution 6.3.1 Initial check items • When a paper misfeed occurs, first perform the following initial check items. Check Item Action Does the paper meet product specifications? Change the paper. Is paper curled, wavy, or damp? See “Solution when paper curl occurs”...
Field Service Ver. 2.0 Jan. 2008 7. Jam display Troubleshooting for d-Color MF450 Jam display Misfeed display • When misfeed occurs, message, misfeed location “Blinking” and paper location “Light- ing” are displayed on the touch panel of the main unit. 4510F4C506DA Display Code...
7. Jam display Field Service Ver. 2.0 Jan. 2008 Sensor layout 4510F4C501DA [1] Upper transport sensor [2] Lower transport sensor PS10 [3] Transport sensor Service Manual Y108462-9...
Field Service Ver. 2.0 Jan. 2008 7. Jam display Solution 7.3.1 Initial check items • When a paper misfeed occurs, first perform the following initial check items. Check Item Action Does the paper meet product specifications? Change the paper. Change the paper. Is paper curled, wavy, or damp? Instruct the user in correct paper storage.