Olivetti d-Color MF451 Instructions Manual page 217

8.1 Paper
% To load label sheets:
Load them in the w orientation, as shown in the illustration.
A label sheet consists of the printing surface, sticking layer,
and pasteboard. Peel off the pasteboard, then you can stick
the label to other objects.
3
Slide the lateral guides to fit the size of paper being loaded.
4
Select the paper type.
% To use label sheets, select [Thick 1].
% OHP transparencies can be printed only in black. Before selecting OHP transparencies, select
[Black] in the Color tab.
% If you select [A6 Card w], the paper type is automatically set to [Thick 3].
d
Reference
To configure paper settings:
Press [Basic] ö [Paper].
d-Color MF651/551/451
8
8-7