Hdd Settings - Olivetti d-Color MF451 Instructions Manual

7
Administrator Settings
Network Settings / WebDAV Settings / WebDAV
Server Settings / SSL Settings
Network Settings / TCPSocket Settings
System Connection / OpenAPI Setting
[Network] in Web Connection / E-Mail Setting /
S/MIME
Network Settings / FTP Setting / [FTP Server Set-
tings]
Network Settings / SNMP Setting / SNMP v1/v2c
Settings
Network Settings / SNMP Setting / SNMP v3 Set-
tings
Security Settings/Security Details/Print Data Cap-
ture
[Maintenance] in Web Connection / Reset / Net-
work Setting Clear
[Security Administrator] in Web Connection / Pass-
word Setting
Security Settings / Security Details / Prohibited
Functions When Authentication Error / Release
Time Settings
Review Secure Print User Box
Security Settings / Security Details / Initialize / Net-
work Settings
Security Settings / Image Log TX Setting
CS Remote Care
If [Enhanced Security settings] is enabled, various security functions are configured to allow you to ensure
the higher-level security of data management. For details, contact your service representative. To enable the
enhanced security mode, the following settings must first be configured. Different screens appear depending
on the current settings.
7.10.6

HDD Settings

This setting is for the hard disk operations. For details, refer to the "User's Guide [Box Operations]".
7-54
Security Settings
Settings to forcibly changed
Set to [SSL Only].
[Use SSL/TLS] is set to [ON].
Set to [SSL Only].
[Automatically Obtain Certificates] is set to [No]. [E-
Mail Text Encryption Method] is set to [3DES].
[FTP Server Settings] is not displayed.
[Write Setting] is set to [Disable].
In [Write User], [Security Level] cannot be set to
[OFF].
Set to [Restrict].
[Network Setting Clear] is not displayed.
[Administrator Password Setting] is not displayed.
The allowable setting range is limited to 5 or more
minutes. This value cannot be less than 5 minutes.
Only the list is displayed before the password au-
thentication is performed.
[Network Settings] is not displayed.
Set to [OFF].
Restricts the device setting in the remote mode
based on CS Remote Care.
7.10
d-Color MF651/551/451