7.10
Security Settings
7.10.4
Security Details
Configure security detail settings to restrict the functions of this machine. You can restrict the functions to
enhance security.
%
Press the [Utility/Counter] key ö [Administrator Settings] ö [Security Settings] ö [Security Details].
Settings
Password Rules
Prohibited Functions When
Authentication Error
d-Color MF651/551/451
Configure whether to enable the password rules.
When enabled, the restrictions are applied to the following passwords. The
set passwords must be changed to ones that meet the conditions.
•
Administrator password
•
User password
•
Account password
•
User Box password
•
Security document password
<Conditions of the password rules>
•
Specify a password in 8 or more digits.
•
Uppercase and lowercase letters are differentiated.
•
Only half-width symbols can be used. For some of the passwords,
specification of """, "+", and "space" is restricted.
•
A password that consists of a repetition of the same character cannot
be specified.
•
The same password as one before being changed cannot be regis-
tered.
Configure restrictions on operation when you enter one of the following
passwords incorrectly.
•
User password
•
Account password
•
User Box password
•
Security document password
•
Administrator password
Mode 1
Disables operations for a specified time if authen-
tication fails.
Mode 2
Disables operations of the control panel if authen-
tication fails.
Specify the max. allowance for authentication op-
eration frequency.
Release
Releases the prohibited operations due to failure
in authentication, enabling the operations.
Release Time Set-
Configure the length of time until prohibited oper-
tings
ations are automatically released.
7
7-51