Job List - Olivetti d-Color MF451 Instructions Manual

5.5 Left panel display
5.5.1

Job List

From the Job List screen, lists of jobs being performed by this machine and the jobs that have been
performed in addition to the job details can be viewed, and the job settings can be changed.
0 If user authentication settings have been applied and the machine is set so that jobs cannot be deleted
by other users, the job is not deleted.
0 If an Administrator Settings parameter was set so that the output priority of jobs cannot be changed,
[Increase Priority] does not appear and the output priority of the jobs cannot be specified.
0 When there is a job being printed, another job can be registered. Up to 251 jobs can be registered in
total.
%
Press [Job List] ö [Job Details] ö [Print].
Settings
Print
Send
Receive
Save
Current Jobs
d-Color MF651/551/451
Opens the screen for checking print jobs.
Opens the screen for checking fax and scan transmission jobs. For de-
tails, refer to the "User's Guide [Network Scan/Fax/Network Fax Op-
erations]".
Opens the screen for checking fax reception jobs. For details, refer to
the "User's Guide [Network Scan/Fax/Network Fax Operations]".
Opens the screen for saving jobs. For details, refer to the "User's
Guide [Box Operations]".
Lists the jobs currently processed. Check the current status.
Delete Deletes a job.
Increase Priority The currently processed print job is interrupt-
(Displayed for the list ed and printing of the job given priority be-
of print jobs in proc- gins. Printing of the interrupted job is
ess) automatically restarted once printing for the
job given priority is finished.
If the currently processed print job cannot be
interrupted because it contains Fold or Sta-
ple, the job given priority is executed after the
currently processed print job has been com-
pleted.
Release Held Job Select to switch to the held job list and
(Displayed for the list change the settings of, print, or delete a held
of print jobs in proc- job.
ess) The held job list contains jobs that could not
be printed because, for example, system
auto reset was activated during the proof
copy.
•
•
If desired, press [Change Settings] to
change the copy settings.
For confirmation, press the [Proof Copy]
key to print a copy from a stored job.
5
5-63