Olivetti d-Color MF451 Instructions Manual page 165

7.1 System Settings
Settings
Gradation Adjustment
Scanner Area
ADF Adjustment
Line Detection
Trail Edge Adjust
User Paper Settings
Erase Adjustment
Factory default
AE Level Adjustment
Leading Edge Adjustment
Centering
Leading Edge Adjustment
(Duplex Side 2)
Centering (Duplex 2nd
Side)
Media Adjustment
Center Staple Position
d-Color MF651/551/451
Adjust irregular gradation levels of print images.
For details, refer to page 7-24.
Image Stabilization Only
Print
Copy
Adjust the scan range of the scanner.
For details on displaying this item, contact your service representative.
Make adjustments for scanning images in the ADF.
For details on displaying this item, contact your service representative.
Prior Detection Setting
Detection While Feeding Setting
Correct a shift if it is detected at the trailing edge of the print result.
Place A3 w, 11 e 17 w, A4 v, or 8-1/2 e 11 v on the bypass tray, and
then press the [Start] key to print a test pattern.
Configure special paper settings for User Paper 1 through 6. Settings to
configure include Basic Weight and Media Adjustment.
For details on displaying this item, contact your service representative.
Non-Image Area Erase Opera-
tion Settings
Standard (2)
0.0 mm
0.0 mm
0.0 mm
0.0 mm
Auto
0.0 mm
Stabilize the image by pressing the
[Start] key before performing grada-
tion adjustment.
Adjust the gradation when the color
gradation has been changed in a print
image. This function performs adjust-
ment, emphasizing the gradation ex-
pression of an image and the
reproducibility of texts or lines.
Adjust the gradation when the color
gradation has been changed in a print
image. This function performs adjust-
ment to save as many images as pos-
sible in memory.
Configure whether to issue an alert
when the original glass is dirty.
• Select an alert display format and
contamination detection level.
Configure whether to remove dust and
dirt on the original glass when scan-
ning an original using ADF.
Configure Non-Image Area operation
settings.
[Auto]:
Automatically detects the background
density of the original, and selects ei-
ther "Bevel" or "Rectangular" accord-
ingly.
[Specify]:
Allows you to manually specify an
erase method and original density. As
an erase method, select "Bevel" or
"Rectangular". Specify an original
density from five levels.
7
7-13