Olivetti d-Color MF451 Instructions Manual page 148

6
Settings
Tri-Fold Print Side
Print Jobs During Copy
Operation
Automatic Image Rotation
Finishing Program
Card Shot Settings
Factory default
Auto Booklet ON when
Fold & Staple
Auto Zoom for Com-
bine/Booklet
Auto Sort/Group Selection
Default Copy Settings
When AMS Direction is In-
correct
Separate Scan Output
Method
Enlargement Rotation
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Tri-Fold Print Side
Print Jobs During Copy
Operation
Automatic Image Rotation
Finishing Program
Card Shot
6-10
This item is displayed when user access is allowed in Administrator set-
tings while the Finisher FS-526 is installed. For details, refer to page
p. 7-45.
Appears when user access is permitted under Administrator settings. For
details, refer to page 7-45.
Configure whether to display the Finishing Program button in the basic set-
tings screen. To display the button, register the contents of the finishing
program.
Register frequently used finishing functions so that you can set them at
once by using the button that appears in the basic settings screen.
This item is set if the finisher is installed.
Appears when user access is permitted under Administrator settings. For
details, refer to page 7-45.
Auto Select Booklet
Auto Display Zoom Ratio
Yes
Factory Default
Print
Page Print
Allow
OFF
ON
Tray Before APS ON
Tray 2
Inside
Accept
When Auto Paper/Auto Zoom Is Set
ON
Layout: Top/Bottom
Zoom: Full Size
Store Original Size: X: 89.0 mm Y: 51.0 mm
Copier Settings 6.3
d-Color MF651/551/451