Method Of Removal And Reinstallation Of The - Mitsubishi Electric F700 Instruction Manual

2.2 Method of removal and reinstallation of the front cover
•Removal of the operation panel
1) Loosen the two screws on the operation panel.
(These screws cannot be removed.)
When reinstalling the operation panel, insert it straight to reinstall securely and tighten the fixed screws of the
operation panel.
FR-F720-30K or less, FR-F740-30K or less
•
Removal
1) Loosen the installation screws of the
front cover.
Front cover
•
Reinstallation
1) Insert the two fixed hooks on the left side of
the front cover into the sockets of the
inverter.
2) Pull the front cover toward you to remove by pushing an
installation hook using left fixed hooks as supports.
Front cover
2) Using the fixed hooks as supports,
securely press the front cover
against the inverter.
(Although installation can be done
with the operation panel mounted,
make sure that a connector is
securely fixed.)
Front cover

Method of removal and reinstallation of the

2) Push the left and right hooks of the operation panel
and pull the operation panel toward you to remove.
Installation hook
Front cover
front cover
3) Tighten the installation
screws and fix the front
cover.
Front cover
2
5