2.6
How to Find the Range and Bearing to a Location
The "ruler" feature measures the range and bearing between any two points on your
chart. Range and bearing between the two points are digitally indicated on the screen.
1. Use the CursorPad to put the cursor on the start point.
2. Long-push the RotoKey.
3. Use the RotoKey to select [Ruler].
4. Use the CursorPad to move the cursor to the 2nd point. A dashed line runs be-
tween the start point and the 2nd point. The range and bearing to the cursor posi-
tion are shown next to the cursor.
5. Push the RotoKey to erase the ruler and the indication.
2.7
Chart Object Information
Vector charts show many objects, like buoys and lighthouses, for which you can find
information. Port, tide and current information are available if the chart contains this
information.
Put the cursor on any chart object to find object type. For additional information, push
the left-click button.
Simple chart object information
+
Starting point
Detailed chart object information
95.90 nm
76.5°M
Range and bearing
to point
2. Chart Plotter
2-7