Drs (Radar) Connection - Furuno MFD8 Installation Manual

2.5.

DRS (Radar) Connection

Up to two DRS (Digital Radar Sensors) can be connected to a NavNet3D network.
Every DRS comes with a supplied 15 Meter cable (FUSA P/N 000-167-636). Other
cable lengths may be purchased if necessary (Note that the part numbers for the
DRS25A are different):
- 10 Meter Cable (FUSA P/N 000-167-635)
- 20 Meter Cable (FUSA P/N 000-167-637)
- 30 Meter Cable (FUSA P/N 000-167-638)
The Radar cable is a "Siamese" type cable that carries power (48V) and Data
(Ethernet). All MFD have a dedicated Power Port (48V) used to connect the Radar
Power Cable. Some combinations require an additional Power Supply Unit (PSU) in
order to provide enough power for the DRS. Please refer to the following table:
DRS2D
MFD8
MFD12
MFDBB
Note: DRS25A antenna includes PSU-013 as standard supply
DRS4D DRS4A
PSU-012
26
DRS6A DRS12A
PSU-012 PSU-012
PSU-012
DRS25A
PSU-013
PSU-013
PSU-013