Show Interface Port-Channel - Cisco ASR 901 Command Reference Manual

show interface port-channel

show interface port-channel
To display the EtherChannel interfaces and channel identifiers, with their mode and operational status,
use the show interface port-channel command in privileged EXEC mode.
Syntax Description number
Command Default
No default behaviors or values.
Command Modes
Privileged EXEC
Command History Release
15.1(2)SNG
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-156
show interface port-channel {number}
Optional value enables the display of information for one port channel
interface number. The range is from 1 to 8.
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Chapter 1 CLI Command Reference
OL-26031-07