Network-Clock Hold-Off Global - Cisco ASR 901 Command Reference Manual

network-clock hold-off global

network-clock hold-off global
To configure general hold-off timer in milliseconds, use the network-clock hold-off command. Use the
no form of the command to remove the configuration.
Syntax Description
global
Command Default
The default value is 300 milliseconds.
Command Modes
Interface configuration
Command History Release
15.1(2)SNG
Usage Guidelines
Displays a warning message for values below 300 ms and above 1800 ms.
Examples This example configures the hold-off timer:
Router(config-if)#network-clock hold-off 75 global
Related Commands Command
network-clock
synchronization ssm
option
Cisco ASR 901 Aggregation Services Router Command Reference Guide
1-72
network-clock hold-off {0 | <50-10000>} global
no network-clock hold-off {0 | <50-10000>} global
Configures the hold-off timer globally.
Modification
Support for this command was introduced on the Cisco ASR 901 router.
Description
Configures the router to work in a synchronized network mode as described
in G.781.
Chapter 1 CLI Command Reference
OL-26031-07