Adding Active Directory Users; Syncing Faxfinder With Active Directory; Deleting Active Directory Users - Multitech FaxFinder FF240-IP Administrator's Manual

Adding Active Directory Users

After configuring FaxFinder to use LDAP authentication, add the Active Directory users who log into FaxFinder to
send faxes.
Note: User details and fax options for Active Directory users are read-only in FaxFinder. To change these users'
details and fax options, make the changes in Active Directory and then sync FaxFinder.
1. Go to Users > Active Directory Users.
2. Click Add.
3. Enter an Active Directory Group name to the AD Group Name field.
4. Click Save.
Wait until FaxFinder adds Active Directory Users to the users list. When FaxFinder completes this function, Active
Directory users become available in the Active Directory Users list.
Note: If an error message appears, the Active Directory Server is not configured correctly, cannot be
accessed, or the group name was entered incorrectly.

Syncing FaxFinder with Active Directory

Sync the Active Directory user database with FaxFinder to ensure FaxFinder has all current Active Directory users.
To do this:
1. Go to Users > Active Directory Users.
2. Click Sync.
FaxFinder indicates when synchronization is complete.

Deleting Active Directory Users

To delete Active Directory users:
1. Go to Users > Active Directory Users.
2. Click Delete.
3. Confirm the deletion.
A message indicates when the deletion is completed. The Active Directory user list is emptied.
®
FaxFinder Fax Server FF240-IP Administrator Guide
USING ACTIVE DIRECTORY WITH FAXFINDER
59