Sending And Receiving A Test Fax; Adding A Printer (Optional); Printer Fields - Multitech FaxFinder FF240-IP Administrator's Manual

BASIC FAXFINDER CONFIGURATION

Sending and Receiving a Test Fax

After you have configured SIP and T.38 to work with your network, use the following steps to send another test
fax.
1. Click Send Fax.
2. Send a fax to a remote fax machine that your SIP device can access.
3. Configure your SIP device dial plan to properly route incoming fax calls to the FaxFinder.
4. Send a fax from the remote fax machine to the FaxFinder.
5. Verify that the FaxFinder received the fax message and then check the administrator's email inbox to see
if it was delivered. To verify that FaxFinder received the fax, click Status & Logs and then click:
■
■
If the email is not delivered within five minutes, refer to Troubleshooting.
Verify that you can open the fax in PDF viewer, such as Adobe Reader. If you configured FaxFinder to deliver faxes
as TIFF files, use the Multi-Tech TIFF viewer or a graphic file viewer to view the fax.

Adding a Printer (Optional)

To route faxes directly to a printer, add a network printer to FaxFinder. Using a printer is not required.
1. Click System Configuration > Printer.
2. Click Add and enter your printer information. Refer to Printer Fields for details.
3. Click Save.
4. Click Print Test Page,

Printer Fields

Field
Printer Make
Printer Model
Printer Name
Description
Device URI
24
Fax Status to see faxes currently in progress.
Inbound Fax Log to see Faxes that have been delivered. Click Details to view a pop-up window
showing delivery details.
, to verify that the printer was setup correctly.
Description
Select your printer's manufacturer from the drop-down list. If the manufacturer is
not listed, select Generic.
Select your printer model from the drop-down list. If your printer make is Generic,
the options here will be generic.
Enter a name for this printer that users will understand. Printer names can contain
upper- and lowercase letters, numbers, hyphens, and underscores. They cannot
have spaces.
Enter a description that will help users select the correct printer, for example, 2nd
floor copy room.
Enter this printer's Uniform Resource Identifier. The URI identifies a printer's
location on the network. To find a valid syntax for your printer, click the Help link
next to this field.
®
FaxFinder Fax Server FF240-IP Administrator Guide