Primary/Secondary Ide Master/Slave Submenus - Intel D815EEA Product Manual

Intel Desktop Board D815EEA Product Guide

Primary/Secondary IDE Master/Slave Submenus

To access these submenus, select Advanced on the menu bar, then IDE Configuration, and then the
master or slave to be configured.
Maintenance
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 18 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 18.

Primary/Secondary IDE Master/Slave Submenus

Feature
Type
LBA Mode Control
(This feature is present
only when Type is not
set to Auto.)
Multi-Sector Transfers
(This feature is present
only when Type is not
set to Auto.)
PIO Mode
(This feature is present
only when Type is not
set to Auto.)
56
Main Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Diskette Configuration
Event Log Configuration
Video Configuration
Options
• None
• User
• Auto (default)
• CD-ROM
• ATAPI Removable
• Other ATAPI
• IDE Removable
• Disabled
• Enabled (default)
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
• Auto (default)
• 0
• 1
• 2
• 3
• 4
Security Power
Description
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
Enables or disables LBA mode control.
Specifies number of sectors per block for transfers from
the hard disk drive to memory.
Check the hard disk drive's specifications for optimum
setting.
Specifies the PIO mode.
Boot Exit
continued