Lan Subsystem Software; Rj-45 Lan Connector Leds; Battery; Power Management Features - Intel D815EEA Product Manual

LAN Subsystem Software

For Intel 82562ET Fast Ethernet WfM PCI LAN software and drivers, refer to the D815EEA link
on Intel's World Wide Web site at:
http://support.intel.com/support/motherboards/desktop

RJ-45 LAN Connector LEDs

Two LEDs are built into the RJ-45 LAN connector. Table 5 describes the LED states when the
board is powered up and the LAN subsystem is operating.
Table 5.

RJ-45 LAN Connector LEDs

LED Color LED State
Green Off
On
Yellow Off
On (steady state)
On (brighter and pulsing)

Battery

A battery on the desktop board keeps the values in CMOS RAM and the clock current when the
computer is turned off. See Chapter 2 for instructions on how to replace the battery.

Power Management Features

Power management is implemented at several levels, including:
•
Software support:
 Advanced Power Management (APM)
 Advanced Configuration and Power Interface (ACPI)
•
Hardware support:
 Wake on LAN technology
 Instantly Available technology
 Wake on Ring
 Resume on Ring
If the board is used with an ACPI-aware operating system, the BIOS can provide ACPI support.
Otherwise, it defaults to APM support.
The BIOS supports ACPI provided the operating system is ACPI-aware. Otherwise, the BIOS
defaults to APM.
Indicates
10 Mbit/sec speed is selected.
100 Mbit/sec speed is selected.
LAN link is not established.
LAN link is established.
The computer is communicating with another computer on
the LAN.
Desktop Board Features
17