1 Desktop Board Features
Table 1 describes the board's major features.
Table 1.
Feature Summary
Characteristic
Form Factor
Processors
Memory
Chipset
I/O Control
Video
Power Management
PC Design Compliance
Peripheral Interfaces
Expansion Capabilities
BIOS
†
Wake on LAN
Technology
Specification
ATX (12.0 inches by 8.2 inches)
• Intel
®
®
Pentium
III processor family with FC-PGA (Flip Chip Pin Grid Array)
package supporting 100 MHz and 133 MHz system bus frequency
• Intel
®
Celeron™ processor family with PPGA (Plastic Pin Grid Array) and
FC-PGA package supporting 66 MHz system bus frequency
Three 168-pin Dual Inline Memory Module (DIMM) sockets supporting:
• 100 MHz PC100 SDRAM (all system bus frequencies)
• 133 MHz PC133 SDRAM (only with 133 MHz system bus frequency processors)
®
Intel
815E Chipset, consisting of:
• Intel
®
FW82815E Graphics Memory Controller Hub (GMCH)
• Intel
®
FW82801BA I/O Controller Hub (ICH2)
• Intel
®
FW82802AB 4 Mbit Firmware Hub (FWH)
SMSC LPC47M102 LPC bus I/O controller
AGP universal connector supporting:
• 1x, 2x, or 4x AGP (AGP 2.0 Compliant) or,
• GPA (Graphics Performance Accelerator) cards for integrated graphics local
memory
• Digital Video Output (DVO) connector (optional)
• Rear panel VGA connector
Support for both ACPI 1.0 and APM 1.2
PC 99 and PC 99A
• Two serial ports: one back panel, and one internal connector
• Four USB ports: two back panel, and optionally, two front panel
• One parallel port
• Two IDE interfaces with Ultra ATA/66, and ATA/100 support
• One diskette drive interface
Six add-in card expansion slots:
• Five PCI bus add-in card slots (SMBus routed to PCI slot 2)
• One AGP universal slot supporting 1x, 2x, and 4x AGP cards
• Intel/AMI BIOS
• Intel
®
82802AB 4 Mbit Firmware Hub (FWH)
• Support for Advanced Power Management (APM), Advanced Configuration
and Power Interface (ACPI), Plug and Play, and SMBIOS
Support for system wake up using an add-in network interface card with remote
wake up capability
7