Vent Kits Components - Heat & Glo Escape-I35FB Owner's Manual

B. Vent Kits Components
Direct Vent Flex Liner Kits (see Figure 14.2)
LINK-DV-30B: Masonry 3 inch fl ex liner kit. Expands to 30
feet. Includes: two liners, termination cap, fl ashing, and
link adapter.
LINK-DV4-30B: Masonry 3 inch fl ex liner kit. Expands to 30
FLASH-DAMP
feet and 4 feet respectively. Includes: two liners, termination
cap, fl ashing, and link adapter.
LINK-ZC-ADP
LINK-DV-30B
DV-46DVA-GK
FLEX3-30
LINK-DV4-30B
Figure 14.2 Direct Vent Flex Liner Kits
Direct Vent Flex Liner Accessory Kits (see Figure 14.3)
Flash-Damp: Zero clearance damper fl ashing kit for use
FLEX3-CNCT
with LINK-DV-30B or LINK-DV4-30B liner kits.
LINK-ZC-ADP: Zero clearance chimney adapter
DV-46DVA-GK: Adapter kit (colinear to coaxial 3 inches
Figure 14.3 Direct Vent Flex Liner Accessory Kits
included in above kits). It is permissible to use DV-46DVA-
GK to connect collinear fl ex vent to SL-D vent pipe to
extend the run.
FLEX3-30: One 3 inch fl exible liner expands to 30 feet.
FLEX-CNCT: Connector kit - 3 inch liner to 3 inch liner,
one connector per kit.
Heat & Glo • Escape-I35FB, Escape-I30FB • 2201-900 Rev. K • 5/11 41