PLACE LOG
ON FLAT SPOT
LOG #3 AND
LOG #5 TOUCH
GROOVE MATES
WITH GRATE BAR
Figure 9. Place Log #5
Log #5 (SRV2202-705): See Figures 2, 4, 9 and 10 for reference details. Place the thick end of Log #5 on the fl at spot of
Log #1. Locate the groove on the thin end of the log. Mate the groove with the grate bar as shown above. Swing the front
end of the log to the left, until it contacts log #3.
PLACE LOG
ON FLAT SPOT
6
PLACE LOG
ON FLAT SPOT
Figure 11. Place Log #6
Log #6 (SRV2202-706): See Figures 2, 5 and Figure 9 for reference details. Place the thick end of the log on the fl at spot
of Log #2. Place the thin end of Log #6 on the fl at spot of Log #5 as shown in Figure 11.
36
5
FLAT SPOT
FOR LOG #6
Heat & Glo • Escape-I35FB, Escape-I30FB • 2201-900 Rev. K • 5/11
5
Figure 10. Log #5
LOG GROOVE
2202-935B