Vent Kits Components - Heat & Glo Grand-XTS Installation Manual

B. Vent Kits Components
Direct Vent Flex Liner Kits (see Figure 15.2)
LINK-DV-30B or (LINK-DV-30): Masonry 3 inch fl ex liner
kit. Expands to 30 feet. Includes: two liners, termination
cap, fl ashing, and link adapter.
LINK-DV4-30B or (LINK-DV4-30): Masonry 3 inch fl ex liner
FLASH-DAMP
kit. Expands to 30 feet and 4 feet respectively. Includes:
two liners, termination cap, fl ashing, and link adapter.
LINK-DV30B
LINK-DV4-30B
Installation
Installation
TERMINATION
CAP
EXHAUST
LINK-ZC-ADP
AIR
VENT PIPE
WARNING:
DO NOT BLOCK
THIS PIPE END!
INLET AIR
VENT PIPE
SVRLINK-ADP
OPTIONAL LINK-ZC-ADPB
FOR USE WITH CLASS A
WOODBURNING PIPE
FLEX3-30
Figure 15.2 Direct Vent Flex Liner Kits
Direct Vent Flex Liner Accessory Kits (see Figure 15.3)
FLEX3-30/2
Flash-Damp: Zero clearance damper fl ashing kit for use
with LINK-DV-30B or LINK-DV4-30B liner kits.
LINK-ZC-ADP: Zero clearance chimney adapter
SVRLINK-ADP: Adapter kit (colinear to coaxial 3 inches
included in above kits).
FLEX3-30: One 3 inch fl exible liner expands to 30 feet.
FLEX3-30/2: Two 3 inch fl exible liners expands to 30 feet
each.
FLEX3-CNCT
FLEX-CNCT: Connector kit - 3 inch liner to 3 inch liner,
one connector per kit.
Figure 15.3 Direct Vent Flex Liner Accessory Kits
Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev. G • 9/08
37