Utility mode
Administrator Code Input
Parameter
Administrator Code In-
put
Note
To change the entered value, press the [C] (clear) key, and then enter the
correct value.
Max. Copy Sets
Parameter
Max. Copy Sets
Disable Sleep Mode
Parameter
Disable Sleep Mode
250/350
Description
The 8-digit administrator access code
entered in the Administrator Code
screen can be changed.
• Current Code:
Type in the currently specified admin-
istrator access code.
• New Code:
Type in the new administrator access
code.
• Retype New Code:
Type in the new administrator access
code again for confirmation.
Description
Specify the number of copies that can be
specified (between 1 and 99 or "OFF").
Description
Select whether or not the setting for dis-
abling Sleep mode is available.
11
Default setting
00000000
Default setting
OFF
Default setting
No
11-29