3
Punching holes in copies (punch settings)
!
Detail
If a punch setting is to be selected, select the orientation in which the
document is positioned. If an Original Direction setting is not selected,
holes may not be punched in the copies as desired. For details on spec-
ifying the document orientation, refer to "Selecting the document orien-
tation (Original Direction settings)" on page 3-19.
When finisher is installed
Paper Weight
60 g/m
to 90 g/m
2
3-56
Paper Size
A3 w to B5 w/v
2
Basic copy operation
250/350